1983 36ft CS Traditional

CABIN INTERIOR GALLEY AND HEAD

• V-berth in bow
• pull out double on starboard and single on port
• quarter berth on starboard stern
• upholstery UV rated corduroy fabric over foam
• teak flooring in good condition
• cupboards, doors and drawers with teak panels and teak trim
• Teak plywood bulkheads
• 3 burner propane stove/ Force 10
• built in fridge/freezer with engine driven compressor ( new system in 2019 )
• stainless steel sink with plastic reinforced drain hose and SS hose clamps
• FLO-JET 12V DC water pump with plastic piping, fittings and WETROL pressure tank
• LED interior lighting and running lights
• new head sink mixer and shower faucet ( 2019 )
• new sanitary lines and macerator for head ( 2019 )
• Espar furnace diesel heater

RIGGING AND SAILS

• Mainsail, Genoa, light and heavy air spinnakers, as well as asymmetrical cruising chute
• Aluminum mast with Burgee and Aero dynamic aluminum spreaders and steaming light
• Main Halyard: inboard duralyn
• Shrouds: 5/16″ SS cable
• Forestay: Seafurl 2 roller furling
• Backstay adjuster: SS and alloy turnbuckle
• Fixed boom
• Spinnaker sheave: Duralyn
• Traveller: aluminum “I” beam bolted to deck

DECK HARDWARE

• Aft. and Forward pulpit: welded SS
• Guard rail:  SS new 2019
• Skin fittings: plastic
• Fairleads: composite
• Wheel steering cable driven
• Aluminum toe rail with spill holes
• 8 Lewmar SS coated brass winches
• Raw SS handrails with aluminum stanchions ( new in 2019 ) bolted to the deck
• plastic cockpit scuppers
• cowl ventilator forward of mast
• rubber deck seal around mast
• 10′ aluminum mooring and anchor cleats
• Companionway hatch: 27″X23″X1/2″ bronze plexiglass
• new cockpit drains and hoses (2019)
• Lofrans electric windlass new in 2019

ENGINE AND MACHINERY

• Electric bilge pumps: Rule 1750 GPH and GUZZLER hand pump
• Drive Shaft stuffing box: Packless sealing system shaft bearing log
• Seacocks: brass ball cocks
• Engine mounts: FG encapsulated bearers with rubber isolator mounts
• Westerbeke 1984 was rebuilt at 1550 hrs in 1993, current hrs 522

NAVIGATION EQUIPMENT AND ELECTRONICS

• Lofrans windlass-model/LEOPARD ( 2019 ) newly wired with remote
• Autohelm-ST4000
• Standard horizon wind inst. and speed log
• Raymarine i50 Tridata display ( new in 2016 ) speed, depth, tem.
• ES98 Raymarine multi function digital display sonar chartplotter ( new in 2016)
• Navigation Pod for mounting instruments (new in 2016 )
• Raymarine cable kit
• Handheld VHF
• new wiring for 120V vac inlet with galvanic isolator ( 2019 )

ELECTRICAL

• 2-interstate 6V DC Batteries connected in series ( 5 years old )
• 1-12V DC deep cycle starting battery ( new in 2019 )
• both enclosed in plastic box, strapped down and protected with Perko+guest spark proof switch below companion way
• wiring factory installed marine grade strand
• fuse panel, shore power breaker panel and polarity indicator
• inverter with shut-off switch on electrical panel
• wired for built in stereo system, but no receiver
• 50′ smart plug and cord ( 2019 )

SAFETY

• 2-3lb dry chemical class ABC fire extinguishers
• life buoy 24″ TAYLOR with 15M line attached
• Flares: 2 Flare guns
• 6 lifejackets
• 2 airhorns
• 1 small first aid kit
• 2 way hand held radio
• 1 boat hook

GROUND TACKLE

• 15kg Bruce anchor with 125′ 3/8 chain and 250′ 5/8 rode with swivel, last 3 new in 2019
• spare Danforth anchor with 250′ rode
• new electric Lofrans windlass (2019)

COCKPIT AND EQUIPMENT

• 1 Magma Barbeque
• 50′ smart plug and cord ( 2019 )
• dock lines, spare lines and fenders
• 1X20lbs propane tank
• 2X20 ltr. diesel cans
• tarps
• 3 winch handles: 2 Harken and 1 Lofrans
• custom spinnaker pole
• Danforth Binnacle mount compass
• stern ladder
• Cdn flag and protest flag
• Hammock
• air pump
• Westerbeke 33 spare parts kit
• Caframo electric heater

HULL

LAST OVERHAULED IN 2019

• hull painted with 2 part polyurethane
• 2 coats of Micron CSC bottom paint
• repair & recore main hatch & turtle as well as port seat locker lid
• remove riser vent, install exhaust riser vent fitting
• re-install engine panel
• drain and clean holding tank, install new hoses
• install new Lofrans windlass
• all above completed in 2019

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.