fbpx

1991 Custom Cutter

CAD69,900

1991 Custom Cutter

Make:
Custom
Model:
Cutter
Model Length:
33 ft
Price:
CAD $69,900
Year:
1991
Boat Name:
Delta Star
Hull Material:
Fiberglass
Draft:
5 ft 5 in
Number of Engines:
1
Fuel Type:
Diesel

Listing Broker

Alex Denny

Yacht Broker - Maple Bay

Cell:250-538-8594

Office:250-597-2628 - EXT 301

Delta Star

This 33′ Cutter is perfectly suited for a couple for local or distant sailing.

REMARKS:  Delta Star was designed by Charles Whitholtz who was a very well know and competent designer. With her anchor bow sprit she is 36 feet overall and 33 feet on deck. She was completed in 1991 and has had three owners. Her first owner was a cabinet maker and the second owner handcrafted custom fine furniture. The talents of these two gentlemen can be seen throughout the boat as the cabinetry, fit and finish shows very well.

Step below and you will feel very much at home in her cozy cabin space, light the fireplace for that extra warmth in the evenings or during the shoulder seasons while swinging at anchor.

Specifications

LOA:
36 ft 0 in
Length:
33 ft
Beam Measure:
10 ft 6 in
Displacement:
15000 lbs
Number of Heads:
1
Number of Cabins:
1
Number of single berths:
1
Number of double berths:
1
Fuel Tanks#:
2
Fuel Tanks Capacity:
40 gallons
Fuel Tank Material:
Stainless Steel
Fresh Water Tanks#:
1
Fresh Water Tanks Capacity:
90 gallons
Holding Tanks#:
1
Holding Tanks Capacity:
34 gallons

propulsion

Engine #1

Make:
Perkins
Model:
Perana M30
Type:
Inboard
Fuel Type:
Diesel
Year:
1991
Hours:
2700

Further Description

1991 Topper Hermanson built Steel 33’Cutter L- 33’ B- 10.6’ D- 5.5’ W- 15000 Lb

This Charles Whitoltz designed cutter is ideally set up for two for any distance passage making or local cruising.

The care of Topper Hermanson is evident when you look at her beautiful round bilge and very fair hull, deck and cabin structure.

She has a full keel, has a removable staysail stay, which means she can be sailed as a cutter and is an extremely capable ocean cruiser with good tankage that would take you anywhere you wish to go.

The gentle motion  will be felt by this hull Design and is no slouch under sail. With her outboard rudder she is easy to controlled on any point of sail with either an Aries Windvane or Autohelm 4000 for the tiller.

 

Interior / Exterior

  • Hanging locker
  • Wet hanging locker in head
  • Sit down navigation table with lots of chart storage
  • Teak folding table Latex Foam Mattress in V Berth (new)
  • Latex Foam Covered Cushions with Ultraleather Coverings
  • Weems & Plath Clock and Barometer
  • 8 Bomar Almag 35 Opening Ports and screens
  • 8 3/8″ Lexan Storm Shutters for Ports
  • 1 Day/Night Solar Vent in head
  • 4 Bronze Dorade Vents with screens
  • 2 Nicro Dorade Vents
  • 1 Vetus Dorade Vent
  • Secure latches for all lockers
  • Lee cloth for sea bunk ( canvas )
  • Dickinson propane Cabin Heater (new 08)
  • Genco Dodger and Bimini
  • Aries Wind Vane Self Steering
  • Hoisting crane & tackle for outboard
  • Ships bell
  • Lots of Handholds for offshore

Engine / Mechanical

  • Engine/Drive Train Perkins Perana M30, 29 HP diesel – fresh water cooled 2700hrs.
  • Drive Saver Engine/Shaft Coupler
  • 1″ Aquamet 22 prop Shaft
  • PSS Dripless Shaft Seal 3 Blade Maxprop Feathering Bronze Propellor
  • 3 Blade Michigan Bronze Propeller (spare) •
  • Transmission rebuilt – March 2007
  • Racor Fuel/ Water separator with Vacuum Gauge, extra filters
  • Fuel Tanks in Fwd and Rear portions of Keel – total of 65 gals
  • Fuel Transfer System between Fuel Tanks with extra racor
  • Water Lift Muffler
  • Single Lever Engine Control
  • Engine Compartment Exhaust Blower
  • Fynspray manual Oil Change Pump
  • Diesel Injector Bleeding Wrench
  • 12 volt engine light
  • Spare fuel filters

Electronics / Navigation

  • Raymarine ST4000GP Tiller Pilot
  • Raymarine Tridata ST60 – depth, speed, water temperature
  • ICOM M700 SSB radio with Matching tuner Unit and Insulated Backstay •
  • ICOM Base station VHF M502
  • Ritchie Navigator Compass
  • Running lights, steaming lights, anchor and tri-colour at top of mast
  • Electrical/Mechanical/Plumbing —
  • 4- 6 Volt Batteries
  • Starting Battery
  • Balmar 100 Amp. Alternator
  • 4 Stage Charge Regulator
  • Four Winds II wind Generator and Associated Charge Controller, mounted on pole
  • 2 -Shell Solar 100 Watt Solar Panels, mounted on lifeline stanchions
  • DC Electrical Panel with Circuit Breakers and Meters
  • New wiring throughout done to a very high standard.
  • AC Electrical Panel with Circuit Breakers and Polarity Lights
  • Maxcharge 40 Amp Battery Charger

Electrical

  • Shore power cord and plug
  • Blue Seas High Amp. Fuses
  • 7 Brass Dome Lights
  • Chart Table and Reading Lights
  • Hella Turbo Fan
  • 2 – Mini Fans Clarion Stereo including 5 disc CD changer, Receiver, Amplifier, sub               woofer and 2 Mission Speakers
  • Technautics 12V Holding Plate Fridge/Freezer
  • Force 10 LPG Galley Stove
  • Xintex Propane Sniffer with Solenoid
  • Carbon monoxide alarm 20 lb Horizontal Aluminum Propane Tank ( hoses and fittings)        have been replaced)
  • Pressurized Fresh Water in Head with Par accumulator tank
  • Flo-jet Quad Pump
  • Gusher MK III foot pump in Galley,  Fynspray bronze Hand pump in Galley
  • West Marine Salt Water wash down Pump
  • 2,000 GPh Rule Bilge Pump , Whale Titan Manual Bilge Pump in Cockpit
  • Bilge High Water Alarm
  • 90 US gallons Fresh Water in 3 Tanks with deck fills
  • Inline Fresh Water Filter
  • 34 Gallon Holding Tan

Sails and Rigging

  •  Metalmast – Aluminum Mast and Boom
  • Forespar – Spinnaker Pole
  • Shrouds- Uppers, Intermediate, Double Lowers, Removable Inner Forestay with bronze lever, double backstays, tangs for running backs – 1/4″ x 19 SS Wire all staloc fittings (entire rig was replaced) – 2005
  • Furlex Furler on 5/16″ SS Wire
  • Main Sail with 3 Reefs (Oneil)
  • Jib 128% with foam luff (North)
  • Staysail with 1 reef (Oneil)
  • Storm Trysail on separate track (as new)
  • Drifter 1.5 oz (as new) • Spinnaker – radial head cruising style with dousing sock 1.5 oz (as new)
  • Main sail & stay sail cover • All lines led aft to cockpit
  • All running rigging replaced
  • Lazy jack system led aft to cockpit Hull and Deck

Hull and Deck

  • Framing Transverse…..2 1/2″ x 1/4″ flatbar on 38″ centres
  • Longitudinals…………..1″ x 1/4″ flatbar on 12″ centres
  • Keel Sole………………….½” plate
  • Hull………………………..10 gauge plate
  • Deck/cabin Side……….11 gauge plate
  • Cabin top….3 layers ¼” marine ply and epoxied over and painted
  • Entire cockpit is an aluminum insert thru bolted in, with aluminum lockers
  • Deck propane locker forward of house
  • Hull was Epoxied and Awlgrip LP paint (applied 2006)
  • 2 coats Bottom paint applied September 2021
  • Topsides painted with 2-part interlux perfection
  • All wood topsides teak with Cetol applied April 2020
  • All wood below, teak with interlux schooner redone 2006
  • Stainless stanchions welded to deck
  • Stainless chainplates welded to deck
  • Stainless cleats 2 bow, 2 stern, port, starboard welded to deck
  • Stainless bow pulpit with teak anchor platform
  • Stainless anchor rollers
  • Teak cockpit grating
  • Winches • Barient Self tailing Chromed Bronze primaries, excellent cond.
  • 2 – #24 • 2 – #17 • 3 winch handles
  • 35 lb CQR Primary Anchor with
  • 140′ Hi-Test Chain and 200’ ½” nylon anchor rode
  • 20 lb Aluminum Spade Anchor ( spare ) 22 lb High Tensile Danforth Anchor with new 150’ ½” triple strand and 15’ chain, set up on stern
  • 15′ 5/16″ Hi-Test Chain ( spare )

Miscellaneous / Safety and Spares

  • Halon Fire Extinguisher in engine room
  • 3 Dry Chemical Fire Extinguishers
  • 2-50′ ½” 3 Strand Nylon Dock Lines
  • 2-50′ 5/8″ 3 Strand Dock Lines
  • 5- 5/8″ Braided Dock Lines
  • 1-Scanmarin 12″ Ball Type Fenders
  • 5- 6″ Dia. Fenders
  • 2 PFD’s
  • Flares
  • Manuals for most equipment on board ,

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

1991 Custom Cutter

1991 Custom Cutter
1991 Custom Cutter
1991 Custom Cutter
1991 Custom Cutter
1991 Custom Cutter
1991 Custom Cutter

Listing Broker

Alex Denny

Yacht Broker - Maple Bay

Cell:250-538-8594

Office:250-597-2628 - EXT 301

1991 Custom Cutter

Listing Broker

Alex Denny

Yacht Broker - Maple Bay

Cell:250-538-8594

Office:250-597-2628 - EXT 301

1991 Custom Cutter

Request more information

Please enter your name, contact information and message into the fields below. Your details will be included in the outgoing email along with your comments.

Fields marked with an asterisk (*) are required fields


    Listing Broker

    Alex Denny

    Yacht Broker - Maple Bay

    Cell:250-538-8594

    Office:250-597-2628 - EXT 301