1981 Bristol Channel Cutter 28

Galley

• Dickenson Adriatic diesel stove
• Origo 1500 single burner alcohol cooktop
• Dickenson propane Sea-B-Que w 10lb. aluminum tank
• Icebox w Figoboat Capri cold box and 12V compressor
• Isotherm 750 watt 5 gallon water heater

Electronics

• Raymarine E80 plotter/sounder
• Raymarine RM80 2kW radar
• Raymarine RS150 GPS (2019)
• Raymarine ST60+ digital depth/speed/log and wind displays
• ICOM IC-M59 VHF radio, ICOM IC-M72 handheld VHF
• Pelagic tiller pilot (incl. spare ram) (2018)
• Ritchie 4″ magnetic compass
• Brass clock and barometer
• Fusion MS-IP700 AM/FM stereo
• Bose 151 interior speakers
• Fusion MS-FR7021 cockpit speakers
• Insignia 22″ 12V flatscreen TV

Electrical

• 30A shore power w Smartplug connector and 50′ cord
• ElectroMax SM12 120A AquaMax alternator (2018)
• Balmar regulator and digital duo charge
• Blue Sea P12 40A battery charger (2021)
• Newmar galvanic isolator
• Four East Penn 8AGC2 6V house batteries (2022)
• North Star Grp.27 AGM start battery
• Two Shell 75W solar panels
• Victron Energy MPPT 100/15 smart solar charger controller (2022)
• Victron Energy smart sense battery, temp and voltage monitor (2022)
• Rule 2000gph Gold Series bilge pump replaced 2020
• Whale Titan bilge pump installed 2020
• Whale Gulper forward bilge pump installed 2019
• Jabsco Par-Max 3 freshwater pump installed 2023

Engine

• Yanmar 3GM30F 3-cyl. engine installed 1997 (2200 hours)
• New 3 pc. s.s. mixing elbow (2023)
• New raw water pump (2023)
• New engine circulation pump (2023)

Sail Inventory

• Double spreader, keel stepped aluminum mast (stripped and painted by Blackline in 2018)
• Bronze thru-bolted chain plates and bronze hardware
• 15′ reaching pole
• Dacron (tanbark) sails manufactured by Hasse & Co., Port Townsend
• Full batten Main w Lazy Jacks; 240 sq.ft.
• Furling Genoa 93%; 320 sq.ft. on Schaefer Yankee 2000 furler
• Hanked on Staysail; 102 sq.ft.
• Storm Trysails; 70 sq.ft.
• Lee; radial head Drifter with snuffer sock
• Bronze/teak boom gallows
• Dodger and extensions made by MasterCraft
• Full 5 pc. tan Sunbrella awning made by MasterCraft
• Five Barient Model 10 single speed bronze winches
• Two Barient Model 21-33 2-speed tailing bronze winches
• Single Lewmar self tailing single speed bronze winch for Main

Ground Tackle

• Vulcan 15kg. galvanized anchor w 250′ all 5/16″ chain
• Lofrans Cayman 88 12V reversible windlass w foot switches and helm control
• Dual bronze bow rollers on bowsprit
• Rocna 6kg. stern anchor
• Fortress FX23 aluminum anchor
• 300′ 5/8″ nylon triple strand w 30′ 5/16″ chain
• 150′ 1/2″ nylon mega braid w 10′ 5/16″ chain
• 550′ 3/8″ nylon stern line

Dinghy

• 7′ sailing dinghy
• Built by Edey & Duff Ltd. Massachusetts, USA
• Designed by Lyle Hess to specifically fit on Bristol Cutter 28
• Optional sailing rig is available

Additional Information

• Teak decks replaced by Jesperson Boat Builders (2018)
• Bowsprit replaced in clear grain Douglas Fir (2018)
• New Boomkin in Sapele (2018)
• New Rudder cheeks in Sapele (2018)
• New fiberglass rudder blade by Cape George Marine (2018) incl. new rudder hardware from Port Townsend Foundry
• New prop shaft, cutlass bearing and PSS dripless shaft gland (2018)
• Campbell Sailor 15.5″x7″ RH bronze prop
• All safety gear included incl. flares and fire extinguishers

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.